Yard Machines MCT33360E - SPECIFICATIONS; ENGINE*; DRIVE SHAFT and CUTTING ATTACHMENT*

17
SPECIFICATIONS
ENGINE*
DRIVE SHAFT and CUTTING ATTACHMENT*
Engine Type.......................................................................................................................................... Air-Cooled, 2-Cycle
Displacement .......................................................................................................................................... 1.95 cu in. (32 cc)
Ignition Type.......................................................................................................................................................... Electronic
Spark Plug Gap ................................................................................................................................. 0.025 in. (0.635 mm.)
Lubrication................................................................................................................................................... Fuel/Oil Mixture
Fuel/Oil Ratio................................................................................................................................................................ 40:1
Carburetor..................................................................................................................................... Primer / Diaphragm Type
Drive.................................................................................................................................................................. Direct Driver
Fuel Tank Capacity............................................................................................................................. 23.3 fl.oz. (689.7 ml.)
Drive Shaft Length ....................................................................................................................................... 48 in. (122 cm)
Handle...............................................................................................................................................................Open Handle
Approximate Unit Weight (No fuel) .......................................................................................................... 11.2 lbs. (5.1 kg.)
Trimming Line Diameter....................................................................................................................... 0.080 in. (2.03 mm.)
Cutting Path Diameter............................................................................................................................. 17 in. (43.18 cm.)
*All specifications are based on the latest product information available at the time of printing. We reserve the right to
make changes at any time without notice.