EasyManua.ls Logo

Yard Machines MCT33360E User Manual

Yard Machines MCT33360E
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Gas Trimmer
Model
MCT33360E
IMPORTANT: READ SAFETY RULES
AND INSTRUCTIONS CAREFULLY
P/N 9096-333606 © 2004
PRINTED IN CHINA
English
Operator’s Manual
Question and Answer IconNeed help?

Do you have a question about the Yard Machines MCT33360E and is the answer not in the manual?

Yard Machines MCT33360E Specifications

General IconGeneral
Power SourceGasoline
Cutting Width16 inches
Cutting SystemDual Line
Shaft TypeStraight
Engine Type2-cycle engine

Summary

INTRODUCTION

SPARK ARRESTOR NOTE

Note regarding spark arrestor requirements for certain land use and states.

CALIFORNIA PROPOSITION 65 WARNING

Warning about chemicals in engine exhaust known to cause cancer or reproductive harm.

RULES FOR SAFE OPERATION

IMPORTANT SAFETY INSTRUCTIONS

Critical safety guidelines to read and follow before operating the unit.

SAFETY WARNINGS FOR GAS UNITS

Specific safety precautions related to the gasoline engine and its operation.

WHILE OPERATING

Guidelines for safe operation of the trimmer during use.

OTHER SAFETY WARNINGS

Additional safety precautions and advice for operating the unit.

SAFETY AND INTERNATIONAL SYMBOLS

Explanation of safety symbols and pictographs used in the manual.

KNOW YOUR UNIT

ASSEMBLY INSTRUCTIONS

INSTALL / ADJUST THE HANDLE

Steps to install and adjust the trimmer handle for proper use.

INSTALL THE CUTTING ATTACHMENT SHIELD

Instructions for securely installing the cutting attachment shield for safety.

EDGE GUIDE WHEEL

Procedure for installing and adjusting the edge guide wheel.

OIL AND FUEL INFORMATION

OIL AND FUEL MIXING INSTRUCTIONS

Detailed instructions for correctly mixing oil and fuel for the engine.

STARTING/STOPPING INSTRUCTIONS

STARTING A COLD ENGINE

Step-by-step guide for starting a cold engine on the trimmer.

STARTING A WARM ENGINE

Steps for starting the trimmer's engine when it is already warm.

STOPPING ENGINE

Procedure for safely stopping the trimmer's engine.

OPERATING INSTRUCTIONS

ADJUSTING TRIMMING LINE LENGTH

Method for releasing and releasing fresh trimmer line.

TRIMMING PROCEDURES

Techniques for effective and safe trimming in various situations.

SCALPING

Instructions and warnings for scalping operations to remove vegetation down to the ground.

SWEEPING

Warning against using the trimmer for sweeping debris due to potential hazards.

MAINTENANCE AND REPAIR INSTRUCTIONS

REPLACING TRIMMING LINE

Detailed steps for replacing the trimmer line.

REPLACING TRIMMING LINE: EASY-LOAD HEAD

Specific instructions for replacing trimmer line on the easy-load head.

AIR FILTER

Instructions for cleaning and maintaining the unit's air filter.

FUEL CAP AND FUEL FILTER

Procedures for maintaining the fuel cap and filter system.

CARBURETOR ADJUSTMENT

Information regarding carburetor adjustment, recommending a service center.

SPARK PLUG

Specifications and instructions for the spark plug gap and torque.

SPARK ARRESTER SCREEN

Procedure for replacing the spark arrester screen.

SHARPENING THE LINE CUTTING BLADE

Steps for sharpening the line cutting blade using a bench vise.

STORING A UNIT

Guidelines and warnings for properly storing the unit for extended periods.

REMOVING A UNIT FROM STORAGE

Steps for preparing the unit after it has been in storage.

TROUBLESHOOTING

SPECIFICATIONS

ENGINE*

Technical specifications for the engine of the trimmer.

DRIVE SHAFT and CUTTING ATTACHMENT*

Specifications for the drive shaft and cutting attachment components.

MANUFACTURER'S LIMITED WARRANTY FOR: YARD MACHINES by MTD

HOW TO OBTAIN SERVICE

Instructions on how to get warranty service and locate authorized dealers.

LIMITED WARRANTY COVERAGE EXCLUSIONS

List of conditions and parts not covered by the limited warranty.

HOW STATE LAW RELATES TO WARRANTY

Information on how state laws affect the warranty coverage and consumer rights.

Related product manuals