Yardistry AVERY - Step 8: Attach Roof Panels Part 2

25 support@yardistrystructures.com
Avery Inst 6C - Attach Roofing Trim
Avery Inst 6C - Attach Roofing Trim
Fig. 8.5
Fig. 8.4
Components
2 x Roof Edge Left
2 x Roof Edge Right
Step 8: Attach Roof Panels
Part 2
E: Place one Roof Edge Left and one Roof Edge Right on the bottom of one Roof Panel Frame so they meet
tight in the centre and the ends are ush with the outside ends of (418) Strap Short and (419) Strap Long.
Attach both Roof Edges with 16 #8 x 1” Hex Roong Screws. (g. 8.4 and 8.5)
#8 x 1” Hex Roong Screws
(16 per Panel Frame)
Hardware
32 x #8 x 1” Hex Roong Screw
Roof
Edge Left
Roof Edge
Right
Roof
Edge Left
Roof Edge
Right
Strap