Yardistry YM12784 - Step 24: Place Peak Cap Assembly on Roof Panels - Part 1; Assembling Peak Cap Components

62 support@yardistrystructures.com
Step 24: Place Peak Cap Assembly on Roof Panels
Part 1
A: Place two Centre Peak Caps so they are tight together then place one Peak Cap Link under Centre Peak
Caps and attach with six 1/4 x 1/2” Pan Bolts (with 1/4” lock nut). (F24.1 and F24.2)
B: Slide one Peak Cap Detail in the end of each Centre Peak Cap and attach with three 1/4 x 1/2” Pan Bolts
(with 1/4” lock nut) per side. (F24.1 and F24.3)
Hardware
12 x 1/4 x 1/2” Pan Bolt (1/4” lock nut)
Components
2 x Peak Cap Detail
2 x Centre Peak Cap
1 x Peak Cap Link
F24.1
1/4” Lock Nut
1/4 x 1/2”
Pan Bolt
Peak Cap
Detail
F24.2
Peak Cap Detail
Centre
Peak Cap
Centre Peak
Cap
Centre
Peak Cap
Peak Cap
Link
1/4 x 1/2”
Pan Bolt
Peak Cap
Link
Centre Peak
Cap
Centre Peak
Cap
F24.3
1/4”
Lock
Nut