Yardistry YM12784 - Step 23: Attach Large Roof Assemblies to Frame - Part 4; Attaching Roof to Beam Brackets and Tightening

61 support@yardistrystructures.com
x 4
G: Attach one Roof to Beam Bracket to the remaining (633) Centre Rafters on each Large Roof Assembly with one
1/4 x 2” Hex Bolt (with two 1/4-5/16” large washers and one 1/4” lock nut) per bracket. (F23.10 and F23.11)
H: From the outside of the assembly have one person push one Large Roof Assembly in so (1195) So󰀩t sits against
the Long Beam Assembly and two people pushing up at the peak. One person fastens each Roof to Beam Bracket
with three #12 x 1-1/2” Pan Screws. Install top screw into (633) Centre Rafter rst then other two into the beam.
Repeat this process for each Large Roof Assembly. (F23.10 and F23.12)
I: Tighten all Bracket bolts in the Large Roof Assemblies.
Step 23: Attach Large Roof Assemblies to Frame
Part 4
F23.10
Large Roof Assembly
Hardware
Roof to
Beam
Bracket
36 x #12 x 1-1/2” Pan Screw
4 x 1/4 x 2” Hex Bolt
(1/4-5/16” large washer x 2, 1/4” lock nut)
1/4”
Lock
Nut
1/4-5/16”
Large Washer
(633) Centre Rafter
(633) Centre Rafter
Roof to
Beam
Bracket
(633) Centre Rafter
Roof to
Beam
Bracket
#12 x 1-1/2”
Pan Screw
F23.11
F23.12
Roof to
Beam
Bracket
Roof to Beam
Bracket
1/4 x 2”
Hex Bolt
4 x Roof to Beam Bracket
Components
(633) Centre Rafter