Yardistry YM12935 - Step 27: Metal Hooks and Plaque; Metal Hook Placement; Gazebo ID Plaque Attachment

56 support@yardistrystructures.com
2- #8 x 1” Pan Screw
Gazebo ID Plaque and metal hook
2- #8 x 1” Pan Screw
Gazebo ID Plaque and metal hook
2- #8 x 1” Pan Screw
Gazebo ID Plaque and metal hook
Step 27: Metal Hooks and Plaque
A: Two 50 mm Hooks are included with this unit for attaching wiring. They can be placed anywhere along the
Corner Rafters as needed. Pre-drill with a 1/8” drill bit before installing. (F27.1 and F27.2)
B: Attach Gazebo ID Plaque to a prominent location on your gazebo with two #8 x 1” Pan Screws. This provides
warnings concerning safety and important contact information. A tracking number is provided to allow you to get
critical information or order replacement parts for this specic model. (F27.1 and F27.3)
F27.1
F27.2
Corner
Rafter
50 mm Hook
F27.3
Note: We have provided two 50 mm
hooks for optional use to hold in place
any wires if required. These hooks are
not designed to hold any heavy products
such as lights, ower pots, etc.
#8 x 1” Pan
Screw
Gazebo
ID Plaque
Hardware
2 x #8 x 1” Pan Screw
Components
2 x 50 mm Hooks
1 x Gazebo ID Plaque