To Next Page

To Previous Page

model no. 054-5756-6 | contact us: 1.866.523.5218

MAINTENANCE

GENERAL MAINTENANCE

Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage

from various types of commercial solvents and may be damaged by their use. Use clean

cloths to remove dirt, dust, lubricant, grease, etc.

• Donotatanytimeletbrakefluids,gasoline,petroleum-basedproducts,penetrating

oils, etc., come in contact with plastic parts. Chemicals can damage, weaken, or

destroy

plastic, which may result in serious personal injury.

LUBRICATION

• All of the bearings in this product are lubricated with a sufficient amount of high-grade

lubricant for the life of the unit under normal operating conditions. Therefore, no further

lubrication is required.



WARNING:

• Whenservicing,useonlyidenticalreplacementparts.Useofanyother

parts may create a hazard or cause product damage.

• Alwayswearsafetygogglesorsafetyglasseswithsideshieldsduring

power tool operation or when blowing dust. If the operation is dusty,

also wear a dust mask.



WARNING:

• Toavoidseriouspersonalinjury,readandunderstandallthesafety

instructions in this section.

• Beforeperforminganymaintenance,makesurethebatteryis

removed. Failure to heed this warning could result in serious personal

injury.

DANGER: Never start the motor before installing the guide bar, chain,

chain cover, and chain cover lock knob. Without all these parts in

place, the clutch can fly off or explode, exposing the user to possible

serious injury.

DANGER: Never touch or adjust the chain while the motor is running.

The saw chain is very sharp; always wear protective gloves when

performing maintenance to the chain to avoid possible serious

lacerations.



CAUTION: Always wear gloves when handling the bar and chain;

these components are sharp and may contain burrs.

Yardworks 054-5756-6 User Manual

Questions and Answers: