EasyManuals Logo

Yardworks 054-5756-6 User Manual

Yardworks 054-5756-6
37 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #30 background imageLoading...
Page #30 background image
model no. 054-5756-6 | contact us: 1.866.523.5218
30
MAINTENANCE
NOTE: During normal saw operation, the temperature of the chain
increases. The drive links of a correctly tensioned warm chain will
hang approximately 1/20’’ (1.27 mm) out of the bar groove.
NOTE: New chains tend to stretch; check the chain tension frequently
and tension as required.
CAUTION: A chain tensioned while warm may be too tight upon
cooling. Check the “cold tension” before next use.
!
!
!
ADJUSTING THE CHAIN TENSION
• Stop the motor and disconnect from power supply before setting the chain tension.
• Slightly loosen the chain cover lock knob.
• Turn the chain tensioning knob clockwise to tension the chain.
• Rotate the chain cover lock knob clockwise to secure. Re-tension the chain whenever
the flats on the drive links hang out of the bar groove.
Flats on drive links
≈1/20’’ (1.27 mm)
WARNING: Never touch or adjust the chain while the motor is running.
The chainsaw is very sharp. Always wear protective gloves when
performing maintenance on the chain.
!

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yardworks 054-5756-6 and is the answer not in the manual?

Yardworks 054-5756-6 Specifications

General IconGeneral
BrandYardworks
Model054-5756-6
CategoryChainsaw
LanguageEnglish

Related product manuals