YASKAWA AC Drive V1000 Option SI-EM3/V - Product Overview; About This Product

2 Product Overview
YASKAWA ELECTRIC SIEP C730600 59A V1000 Option Modbus TCP/IP Technical Manual 7
2 Product Overview
 About This Product
This option provides a communications connection between the drive and a Modbus TCP/IP network. The option
connects the drive to a Modbus TCP/IP network and facilitates the exchange of data.
This manual explains the handling, installation and specifications of this product.
The option is a communications link to connect industrial devices (such as smart motor controllers, operator interfaces,
and variable frequency drives) as well as control devices (such as programmable controllers and computers) to a
network. The option is a simple, networking solution that reduces the cost and time to wire and install factory automation
devices, while providing interchangeability of like components from multiple vendors.
By installing the option to a drive, it is possible to do the following from a Modbus TCP/IP master device:
• operate the drive
• monitor the operation status of the drive
• change parameter settings.
 Applicable Models
The option can be used with the drive models in Table 1.
Table 1 Applicable Models
Drive Series
<1> See “PRG” on the drive nameplate for the software version number.
Drive Model Number Software Version <1>
V1000 CIMR-VA ≥ 1012
Modbus_conditional_E.fm 7 ページ ２０１２年３月７日 水曜日 午前１１時３１分