YASKAWA AC Drive V1000 Option SI-EM3/V - Receiving

8 YASKAWA ELECTRIC SIEP C730600 59A V1000 Option Modbus TCP/IP Technical Manual
3 Receiving
3 Receiving
Please perform the following tasks upon receipt of the option:
• Inspect the option for damage. Contact the shipper immediately if the option appears damaged upon receipt.
• Verify receipt of the correct model by checking the model number printed on the name plate of the option package.
• Contact your supplier if you have received the wrong model or the option does not function properly.
 Option Package Contents
Table 2 Option Package Contents
 Tools Required for Installation
Note: Tools required to prepare the option cables for wiring are not listed in this manual.
Description: Option Unit Ground Wire Warning Labels Installation Manual
_
Quantity: 1411
A Phillips screwdriver (M3, M3.5 to M6 metric or #1, #2 U.S. standard <1>) is required to install the option.
<1> Screw sizes vary by drive capacity. Select a screwdriver that matches the drive capacity.
MANUAL
Modbus_conditional_E.fm 8 ページ ２０１２年３月７日 水曜日 午前１１時３１分