YASKAWA AC Drive V1000 Option SI-EM3/V - Option Components

4 Option Components
YASKAWA ELECTRIC SIEP C730600 59A V1000 Option Modbus TCP/IP Technical Manual 9
4 Option Components
 SI-EM3/V Option
Figure 1
Figure 1 Option Unit
 Dimensions
The installed option adds 27 mm (1.06 in.) to the total depth of the drive.
Figure 2
Figure 2 Dimensions
A – LED (MS) H – Mounting tabs
B – LED (NS) I – Ground wire
<1>
C – Option cover J – Pass-through hole for wire
<1> Ground wires are packaged loose inside the option packaging and must be connected during installation.
<2> Refer to Option LED Display on page 11 for details on the LEDs.
D – Modbus TCP/IP PCB K – Communication connector CN1 (RJ45)
E – Screw hole (attaching option cover) L – LED (LINK/ACT)
<2>
F – Nameplate M – LED (10/100) <2>
G – Functional Earth cable connection (FE) N – Option connector
A
B
C
H
E
D
H
G
I
J
N
F
K
00000000000000
SI-EN3/V
1XXX
L
M
Option with cover removed
Underside
MS
NS
Option with cover attached
V1000
27 mm (1.06 in.)
V1000
Modbus_conditional_E.fm 9 ページ ２０１２年３月７日 水曜日 午前１１時３１分