Setting the Calculation Target Range
8.
Press the THRESH soft key. The threshold setting screen is displayed.
9.
Enter a threshold using the rotary knob, arrow keys, or numeric key pad.
10.
Press ENTER.
11.
Press the OPERATION AREA soft key. The calculation target range setting menu
is displayed.
12.
Press the soft key corresponding to the range to be set as the calculation target.
Entire range
Between L1 and L2
Outside L1 and L2
Note
For information about the calculation target range, see the explanation.
Selecting the Curve Fitting Algorithm
13.
Press the FITTING ALGO soft key. The algorithm setting menu is displayed.
14.
Press the soft key corresponding to the algorithm you wish to use.
Note
For information about the curve fitting algorithm, see the explanation.
6.7 Curve Fitting
To Next Page
Loading...