YASKAWA AQ6370B - Chapter 10 Maintenance; 10.1 Upgrading the Firmware

10-1
IM 735302-01E
Maintenance
1
2
3
4
5
6
7
8
9
10
11
App
Index
Chapter 10 Maintenance
10.1 Upgrading the Firmware
Procedure
Preparing for Upgrade
Downloading the Firmware
Download the updating software from the Yokogawa Web site.
Save the downloaded software to a USB memory device.
http://www.yokogawa.co.jp/tm/
Removing the Ethernet Cable
Confirm that the instrument is not connected to a network. The upgrade cannot be
performed if connected to a network.
Upgrading the Firmware
CAUTION
During the upgrade, do not manually turn the power OFF. The instrument may not
be able to start up again.
1.
Press SYSTEM. The menu regarding the system appears.
2.
Press the MORE 1/4 soft key to display MORE 4/4.
3.
Press the VERSION soft key. The software version is displayed.
4.
Press the UPDATE soft key. The message, “Insert Update Files” is displayed.
5.
Insert the USB memory device containing the updating software into the
instrument.
6.
Press the CONTINUE soft key. A list of updating software is displayed.
7.
The message, “Please remove USB storage device” is displayed. Remove the
USB memory.