10.3 Operational Inspection
Checking the Operations of Each Switch
With the power to the instrument turned ON, operate each switch once briefly to check
that the unit functions properly.
Checking the Operations of the Built-In Thermal Printer (Optional)
1.
Open the cover of the printer inside the unit. Check that the printer paper has
been placed properly. For instructions on installing the printer paper, see section
4.6, “Printing from the Built-In Printer.”
2.
When the window shows waveforms, press the FEED switch and check that
paper is being fed into the printer.
3.
Press the COPY switch and check that the indications on the window are printed
properly.
To Next Page
Loading...