4-11
IM 735302-01E
Common Operations
Printing
You can output the measured waveforms displayed on screen to the internal printer.
Executing Printing
1.
Press COPY. An image of the current screen is printed on the built-in printer.
Cancelling Printing
2.
Press UNDO/LOCAL.
Feeding Paper
3.
Press FEED. Paper feeding continues as long as you hold down the button.
Note
• If you press COPY during sweeping, sweeping stops. After printing, sweeping starts again.
• If the printer runs out of recording paper during printing or if you press COPY without
returning the release arm to the HOLD position, the following warning is displayed:
(WARNING 160 : “Printer paper empty”, WARNING 161 : “Printer head up”).
• When printing continuously for a long period of time, the printer head can become hot,
causing printer failure. The following warning is displayed: (WARNING 164: “Printer Head
Temperature error”). If this warning appears, wait a few minutes and try again. When the
printer head cools down, the printing capability will be restored. Avoid printing continuously
for long periods of time.
4.6 Printing Out Using the Internal Printer (Optional)
To Next Page
Loading...