8.8 Saving/Loading Template Data
Procedure
You can save or load template file in CSV format.
CAUTION
Do not remove the USB storage medium or turn the power OFF while the USB
storage medium access indicator is blinking. This can damage the data on the
medium or the device itself. Also, always place a USB storage medium in the
removable state (following the procedure in section 8.1) before removing it.
Setting the Type of the File to Be Saved to TEMPLATE
1.
Press FILE.
2.
Press the ITEM SELECT soft key. The soft key menu switches.
3.
Press the TEMPLATE soft key. TEMPLATE is selected, and the screen returns to
the previous stage.
4.
Press the WRITE soft key to display the template list and file list.
To Next Page
Loading...