7-47
IM 735302-01E
Analysis
Turning the Template Data Display ON/OFF
1.
Press ADVANCE followed by the TEMPLATE soft key.
2.
Press the TEMPLATE DISPLAY soft key. The display ON/OFF switch menu is
displayed.
3.
Press the soft keys for each of the three lines (UPPER LINE DISPLAY, LOWER
LINE DISPLAY, and TARGET LINE DISPLAY), and select ON or OFF. The
selection changes each time you press the key.
Note
If the GO/NO GO soft key is set to ON, a Go/No Go test is performed according to the test type,
even if the TEMPLATE DISPLAY soft key indicator is set to OFF.
7.12 Go/No-Go Judgment (Template)
To Next Page
Loading...