Entering the Name of the File to Be Saved
If a file name is not entered, it is automatically assigned in the form DXXXX.DT8 or
DXXXX.CSV (where XXXX is a serial number starting from 0000).
For creating a directory and sorting the file list, see the page 8-9.
9.
Using the rotary knob or arrow keys, move the cursor to the line in the file list
displaying NEW FILE.
10.
Press the FILE NAME soft key. The text entry window and corresponding soft key
menu are displayed.
11
Follow the instructions in section 4.3 to enter a file name.
12.
Press the DONE soft key. The file name is confirmed, and the screen returns to
the previous stage.
Sets the file name
Creates a directory
Sorts the file list
Setting the Save Method and Executing the Save
13.
Press the WRITE MODE soft key and specify OVER (overwrite) or ADD (add).
14.
To overwrite an existing file, move the cursor to the file name to be overwritten.
15.
Press the EXECUTE soft key. The save executes.
When the
RETURN soft key is pressed, the data is saved. The screen returns to
the previous menu.
16.
When overwriting during a save, a confirmation message appears. Press the YES
soft key. To cancel the save press NO soft key.
8.5 Saving/Loading Analysis Results Data
To Next Page
Loading...