Data Format
You can save in ASCII format.
DT8
Saves as text data.
CSV
Saves the file in CSV (comma separated value) ASCII format.
Data Format
DT8 format is as follows.
"70BDAT "
Label
" "
2006 Apr 07 16:42
Date/time of save
"<NF ANALYSIS> TH:20.00dB MODE DIFF:3.00dB OFST(IN):0.00dB OFST(OUT):0.00dB"
" ASE ALGO:AUTO-FIX FIT AREA:AUTO MASK AREA:--- FIT ALGO:LINEAR "
" NO. WAVELENGTH INPUT LVL OUTPUT LVL ASE LVL RESOLN GAIN NF" Header and data
" [nm] [dBm] [dBm] [dBm] [nm] [dB] [dB]" analysis results
" 1 1544.4983 -29.320 -2.260 -22.281 0.102 27.017 8.533 "
" 2 1545.3041 -29.530 -2.420 -22.184 0.101 27.064 8.619 "
"CTRWL 1551.670000"
"SPAN 20.000000"
"REFL -10.0 dBm"
"LSCL 10.0"
"RESLN 0.100"
Measurement condition parameter
"AVG", 1
"SMPL 2001"
"HIGH 2"
"NMSK OFF"
1541.6700, -23.200
Sampling point portion of the waveform data
....... ....
(wavelength and level value)
8.5 Saving/Loading Analysis Results Data
To Next Page
Loading...