XdB_STOP-BAND
λ
i
Wavelength
Level [dB]
nominal wavelength
xdB
xdB stop-band
Port A
Port B
Parameter
THRESH
Procedure
Obtain the width (xdB_stop-Band) that centers on the nominal wavelength
λ
i of each
channel and that is located below by the parameter THRESH_LEVEL both on the left
and on the right.
XdB_ELIMINATION BAND
λ
i
Wavelength
nominal wavelength
Port A
Port B
Level [dB]
xdB Elimnation
band
xdB
Test Band
Maximum Level
in Test Band
Parameter
THRESH
TEST BAND
Procedure
• Perform the peak search within the range of the parameter Test_Band/2 by centering
on the nominal wavelength
λ
i of a channel and obtain the peak level (LPi).
• Obtain the width (xdB_Elimination_Wavelength) that is above the peak level LPi
obtained in the above procedure by the parameter THRESH_LEVEL both on the left
and on the right.
Appendix 6 Details of Optical Filter Analysis Function
To Next Page
Loading...