9
OPERATION
WARNING
(Ref. page)
S Only turn ON the input power supply after replacing the front
cover. Do not remove the cover while current is flowing.
Failure to observe this warning can result in an electrical shock.
41
CAUTION
(Ref. page)
S Never touch the heatsink or discharging resistor since the
temperature is very high.
Failure to observe this caution can result in harmful burns to the
body.
41
S Do not check signals during operation.
The machine or the inverter may be damaged.
41
S All theconstantsofthe thebrakingunit andthe brakingresistor
unit have been preset at the factory. Do not change the
settings unnecessarily.
41
To Next Page
Loading...
Need help?
General