12.2 Troubleshooting System Errors
12.2.4 System Register Configuration and Error Status
12-19
[ b ] LIO-01/LIO-02 Module Error Status (Slot 1)
[ c ] SVB-01 Module Error Status (Slot 2)
The above error status is meant to check I/O errors when an I/O Module is connected. Errors when SERVOPACKs
and/or MECHATROLINK-II inverters are connected will not be written. Use the monitoring parameter to check errors
when SERVOPACKs and/or MECHATROLINK-II inverters are connected.
Not usedSW00226
Error code (I/O error = 2) Subslot No. (= 1)SW00224
Error code (I/O error = 2) Subslot No. (= 2)SW00225
(Bit No.) F 87 0
Not used
Not usedSW00227 Not used
Not usedSW00228 Not used
Not usedSW00229 Not used
Not usedSW00230 Not used
Not usedSW00231 Not used
ST#15SW00233
Error code (Station error = 1) Subslot No. (= 1)SW00232
(Bit No.) F 87 0
ST#2 ST#1 Not used
Not usedSW00234 ST#30 ST#17 ST#16
Not usedSW00235 Not used
Not usedSW00236 Not used
Not usedSW00237 Not used
Not usedSW00238 Not used
Not usedSW00239 Not used
To Next Page
Loading...
