Appendix C Initializing the Absolute Encoder
C.1 Σ-III, Σ-V, and Σ-7 Series SERVOPACKs
A-13
3.
Keep pressing the Key until “PGCL1” is changed to “PGCL5.”
4.
Press the Key.
“BB” in the status display changes to “Done.”
5.
Press the Key. The display returns to the Utility Function Mode main menu.
This completes setting up the absolute encoder. Turn the power supply OFF and then back ON to reset the SERVO-
PACK.
To Next Page
Loading...
