YASKAWA MP Series Driver Manual

MP Series SIO (Extension) Driver
GP-Pro EX Device/PLC Connection Manual
4
 COM Port of IPC
When connecting IPC with External Device, the COM port which can be used changes with series and SIO type.
Please refer to the manual of IPC for details.
Usable port
Dip switch setting: RS-232C
Series
Usable port
RS-232C RS-422/485(4 wire) RS-422/485(2 wire)
PS-2000B
COM1
*1
, COM2,
COM3
*1
, COM4
*1 The RI/5V can be switched. Please switch with the change switch of IPC.
--
PS-3450A, PS-3451A COM1, COM2
*1*2
COM2
*1*2
COM2
*1*2
PS-3650A, PS-3651A COM1
*1
--
PS-3700A (Pentium®4-M)
PS-3710A
COM1
*1
, COM2
*1
,
COM3
*2
, COM4
*2 It is necessary to set up the SIO type with the Dip switch. Please set up as follows according to SIO
type to be used.
COM3
*2
COM3
*2
PS-3711A COM1
*1
, COM2
*2
COM2
*2
COM2
*2
PL-3000B
COM1
*1*2
, COM2
*1
,
COM3, COM4
COM1
*1*2
COM1
*1*2
Dip switch Setting Description
1OFF
*1
*1 It is necessary to turn ON the set value, only when using PS-3450A and PS-3451A.
Reserve (always OFF)
2OFF
SIO type: RS-232C
3OFF
4 OFF Output mode of SD (TXD) data: Always output
5 OFF Terminal resistance (220Ω) insertion to SD (TXD): None
6 OFF Terminal resistance (220Ω) insertion to RD (RXD): None
7 OFF Short-circuit of SDA (TXA) and RDA (RXA): Does not Exist
8 OFF Short-circuit of SDB (TXB) and RDB (RXB): Does not Exist
9OFF
RS (RTS) Auto control mode: Disable
10 OFF

YASKAWA MP Series Specifications

General

Brand	YASKAWA
Model	MP Series
Category	Controller
Language	English