YASKAWA Varispeed-616G3

(2)
OPTION UNITS
OPTIONS
Name
Model
(Code No .)
Function
Installing Position
Document
No .
Permits display of
frequency and current
by
digital monitor and indi-
Uigital
Monitor
HOP - 101 cation of a problem .
"~
On
the inverter
TOE-
(73041 - 0911X) Not equipped with
key pads for RUN/STOP operation and setting
0730-50 .4
a constant so that it can
be safely used at th e site .
HOP - 102
Digital operator (JVOP-100) and digital monitor
(JVUP-101) are bulit-
Remote Operator
(73041
- 0912X)
in . Can perform operation or monitorirg
by serial communication
Separately-mounted
d
at a distance of 328ft (100m) maximum from
the inverter .
200mA current IOOP
For open
or
Remote Monitor
HOP -103
Power supply : 85 to 264VAC, 50 to 60Hz
enclosed type
__
(73
04 1
-
0913X)
(D-S
U B c onnector, cover, pow er supp ly con ne ctor provided)
TOE-
C736-20 .4
Mounted on the inverter for remote operation or monitoring
[up
HOP - 104
to
32811 (100m)l
by remote operator or remote monitor
,
(JVOP-102)
Remote
Interface
(73041 - 0914X)
(JVOP-103) .
On
the inverter
20mA current 100P/RS-232C
(D-SUB connector, cover
provided)
JVOP - 109
This
removable adapter panel can be
used on the inverter cover with
Operator/Monitor Adapter
(73041 - 0919X)
an
extension cable when the
or
I
digital operator
digital monitor needs On the inverter
i to be removed from the inverter cover .
3 .3ft
(tin)
cable
C736
TOE-
-
Adapter Panel Exclusive
(72616-W3U01-O1) Used for remote mounting of the digital operator/monitor
using adapter
50 .11
Use Extension Cable 9 .9ft (3m)
cable panel (JVUP-109)
(72616-W3003-01)
rAn exclusive
control parcel for remotely setting frequency and for starling
VS Operator HOP - 95 . . and stopping
an inverter using analog commands (distance up to 164ft
(Small Plastic Version) (73041 - 0905X_-'_'J,) (50m)j .
Separately installed
-
Scale on the frequency
indicator : 60/120Hz, 90/180Hr
*, An exclusive control panel for remotely setting
frequency and for starting
VS Operator
JVOP - 95-L",
and stopping an inverter using analog commands
distance up to 164ft
(Standard Version)
(73041 - 0905X " -_ ;)
(50m)j .
Separately installed
-
Scale on t h e fre quency indic a tor, 75Hz, 150H7, 220Hz
This extension cable is used when the digital operator or digital
Extension *'
3 .311 (lm) cable
monitor
is used after removing from the inverter front
cover . *i
Cable for Digital
(72616 - W3001)
The cable is
available in 3 .311 (1m) and 9 .911(3m) lengths . The package
the inverter
TOE-
Operator
Operator
or Monitor
9 .9ft (3m) cable
of the extension
cable includes a simple indicating cover . Depending
0730-50 .10
(72616 - W3003)
on the application, the use of
the operator/monitor adapter JVOP-109
is recommended .
for more: efesotomasyon - Yaskawa drive