4
Before use,
(1) Before using PG−X2, read this manual and the manual for the
installation of the inverter.
(2) Before connecting PG−X2 or external terminals, turn OFF main power
of the inverter and verify the CHARGE indicaor lamp of the inverter is
OFF.
(3) When ordering PG−X2, specify the name and code number.
1 Inspection after Delivery
CAUTION
S Verify that ordered products have been delivered.
Installation of a wrong device may lead to injury or damage.
Though the products have undergone rigorous inspection before shipping, check
the following for safety.
S Check the name written on the product to verify that ordered products have
been delivered.
S Check for damage caused during transportation.
If there is anything uncertain on the structure, contact your YASKAWA repre-
sentative.
NOTE
AUDIN - 7 bis rue de Tinqueux - 51100 Reims - France
Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : info@audin.fr
To Next Page
Loading...
