YASKAWA YWE-EH500-6N0 - Adjustment of MAG;MIG Pulse Welding Characteristics

13.5 Adjustment of Pulse Welding Characteristics
13-7
HW0480311
HW0480311
13.5 Adjustment of Pulse Welding Characteristics
13.5.1 Adjustment of MAG/MIG Pulse Welding Characteris-
tics
The following parameters change the pulse welding characteristics under the main character-
istics for MAG/MIG pulse welding using mixed gas with Ar 98% or less.
Parameter
No.
Meaning Guideline of Adjustment
P08
Pulse peak current for droplet transition -For excessive spatters;
Increase the value.
-For excessive burning;
Decrease the value.
P09
Base current to keep arc
P10
Pulse peak time for droplet transition
P31
Pulse current increasing speed -For arc repelling;
Increase the value.
-For arc burning;
Decrease the value.
P33
Pulse current decreasing speed -For arc burning;
Increase the value.
-For arc repelling;
Decrease the value.
t
I
P31
P10
P09
P33
P08
Pulsed current
Droplet transition
Base current
Pulsed current
Pulsed current decreasing speed
Base current
Pulse time
Pulsed current increasing speed
100/129