4.3 List of Process Parameters
4-18
HW0480311
HW0480311
*1 P: For pulse welding (including aluminum pulse)
A: For aluminum welding
S: For short-circuit welding
C: Common for all the welding types
P55
A Low-pulse frequency ratio
(for welding type 2.14, aluminum)
Changes the frequency based on C parameter C03.
E.g.)
When C03=100 and P55=50%, 5.0Hz
P56
A Low-pulse wire feeding speed
ratio
(for welding type 2.14, aluminum)
Changes the amplitude based on C parameter C04.
E.g.)
When C04=10 and P55=200%, C04*200%=20%
P57
to
P59
- Reserved for system Do not change.
P60
C Synergic voltage adjustment
(automatic adjustment)
Compensates the voltage by 1V with
±10%.
P61
P Arc length control gain
P62
C Current output characteristic 1 Wire feeding speed compensation ratio 1 (unit: %)
P63
C Current output characteristic 2 Wire feeding speed compensation ratio 2 (unit: %)
P64
to
P67
- Reserved for system Do not change.
Display
No.
*1
Items Description
To Next Page
Loading...