8.5 Replace Fuse
8-4
HW0480311
HW0480311
8.5 Replace Fuse
If any fault shown below occurs,Check fuse.If Fuse blown again after replace fuse,Contact
your Yaskawa representative.
Table. 10 Fuse
To Replace Fuse 5A, Remove two screws at a control panel and open a control panel.
Item Fault
Fuse 10A blown.(purple
color)
• Although the start signal is ON or the wire inching signal is
ON,Motor does not operate.
• Cooling fan does not rotate.
Fuse 5A blown. • Although power switch is ON,the Digital Meter does not dis-
play.
To Next Page
Loading...