Yealink CP860 - Page 100

Administrator’s Guide for CP860 IP conference phones
88
Navigate to:
http://<phoneIPAddress>/servlet
?p=settings-areacode&q=load
Details of Configuration Parameters:
Parameters
Permitted Values
Default
dialplan.area_code.code
String within 16 characters
Blank
Description:
Configures the area code to be added before the entered numbers when dialing
out.
Example:
dialplan.area_code.code = 010
Web User Interface:
Settings->Dial Plan->Area Code->Code
Phone User Interface:
None
dialplan.area_code.min_len
Integer from 1 to 15
1
Description:
Configures the minimum length of the entered numbers.
Web User Interface:
Settings->Dial Plan->Area Code->Min Length (1-15)
Phone User Interface:
None
dialplan.area_code.max_len
Integer from 1 to 15
15
Description:
Configures the maximum length of the entered numbers.
Note: The value must be larger than the minimum length.
Web User Interface:
Settings->Dial Plan->Area Code->Max Length (1-15)
Phone User Interface:
None
To configure an area code rule via web user interface:
1. Click on Settings->Dial Plan->Area Code.