Configuring Basic Features
169
3. Enter the desired value in the DTMF Payload Type (96~127) field.
4. Click Confirm to accept the change.
To configure the number of times to send the end RTP Event packet via web user
interface:
1. Click on Features->General Information.
2. Select the desired value (1-3) from the pull-down list of DTMF Repetition.
3. Click Confirm to accept the change.
Suppress DTMF display allows IP phones to suppress the display of DTMF digits. The
digits are displayed as “*” on the LCD screen. Suppress DTMF display delay defines
To Next Page
Loading...
