Yealink CP860 - Page 182

Administrator’s Guide for CP860 IP conference phones
170
whether to display the DTMF digits for a short period of time before displaying as “*”.
Procedure
Configuration changes can be performed using the configuration files or locally.
Configuration File
y000000000037.cfg
Configure suppress DTMF
display and suppress DTMF
display delay.
Parameters:
features.dtmf.hide
features.dtmf.hide_delay
Local
Web User Interface
Configure suppress DTMF
display and suppress DTMF
display delay.
Navigate to:
http://<phoneIPAddress>/servl
et?p=features-general&q=loa
d
Details of Configuration Parameters:
Parameters
Permitted Values
Default
features.dtmf.hide
0 or 1
0
Description:
Enables or disables the IP phone to suppress the display of DTMF digits during an
active call.
0-Disabled
1-Enabled
If it is set to 1 (Enabled), the DTMF digits are displayed as asterisks.
Web User Interface:
Features->General Information->Suppress DTMF Display
Phone User Interface:
None
features.dtmf.hide_delay
0 or 1
0