Yealink CP860 - Page 118

Administrator’s Guide for CP860 IP conference phones
106
4. (Optional.) Enter the call waiting off code in the Call Waiting Off Code field.
5. Click Confirm to accept the change.
To configure the call waiting tone via web user interface:
1. Click on Features->Audio.
2. Select the desired value from the pull-down list of Call Waiting Tone.
3. Click Confirm to accept the change.
To configure call waiting and call waiting tone via phone user interface:
1. Press Menu->Features->Call Waiting.
2. Press the or soft key to select Enable from the Call Waiting field.
3. Press the or soft key to select Enable from the Play Tone field.
4. (Optional.) Enter the call waiting on code or off code respectively in the On Code
or Off Code field.
5. Press the Save soft key to accept the change.