Yealink CP860 - Page 122

Administrator’s Guide for CP860 IP conference phones
110
account.X.auto_answer_mute_enable
y000000000037.cfg
Specify a period of delay time for auto
answer.
Parameter:
features.auto_answer_delay
Local
Web User Interface
Configure auto answer.
Navigate to:
http://<phoneIPAddress>/servlet?p=a
ccount-basic&q=load&acc=0
Specify a period of delay time for auto
answer.
http://<phoneIPAddress>/servlet?p=f
eatures-general&q=load
Phone User Interface
Configure auto answer.
Details of Configuration Parameters:
Parameters
Permitted Values
Default
account.X.auto_answer
(X = 1)
0 or 1
0
Description:
Enables or disables auto answer feature for account X.
0-Disabled
1-Enabled
If it is set to 1 (Enabled), the IP phone can automatically answer an incoming call.
Note: The IP phone can automatically answer multiple incoming calls when auto
answer is enabled.
Web User Interface:
Account->Basic->Auto Answer
Phone User Interface:
Menu->Features->Auto Answer->Auto Answer
account.X.auto_answer_mute_enable
(X = 1)
0 or 1
1
Description:
Enables or disables auto answer mute feature for account X.
0-Disabled
1-Enabled