Yealink CP860 - Voice Mail

Configuring Basic Features
125
return code received. Available return codes and reasons are:
 404 (Not found)
 480 (Temporarily not available)
 486 (Busy here)
Procedure
Return code for call rejection can be configured using the configuration files or locally.
Configuration File
y000000000037.cfg
Configure the return code when
refusing a call.
Parameter:
features.normal_refuse_code
Local
Web User Interface
Configure the return code when
refusing a call.
Navigate to:
http://<phoneIPAddress>/servlet
?p=features-general&q=load
Details of the Configuration Parameter:
Parameter
Permitted Values
Default
features.normal_refuse_code
404, 480 or 486
486
Description:
Configures a return code and reason of SIP response messages when the IP phone
rejects an incoming call. A specific reason is displayed on the caller’s phone LCD
screen.
404-No Found
480-Temporarily not available
486-Busy here
If it is set to 486 (Busy here), the caller’s phone LCD screen will display the message
“Busy here” when the callee rejects the incoming call.
Web User Interface:
Features->General Information->Return Code When Refuse
Phone User Interface:
None
To specify the return code when refusing a call via web user interface:
1. Click on Features->General Information.