Yealink CP860 - Page 175

Configuring Basic Features
163
Details of the Configuration Parameter:
Parameter
Permitted Values
Default
account.X.cid_source
(X = 1)
0, 1, 2, 3, 4 or 5
0
Description:
Configures the presentation of the caller identity when receiving an incoming call.
0-FROM (Derives the name and number of the caller from the “From” header).
1-PAI (Derives the name and number of the caller from the “PAI” header. If the server
does not send the “PAI” header, displays “anonymity” on the callee’s phone).
2-PAI-FROM (Derives the name and number of the caller from the “PAI” header
preferentially. If the server does not send the “PAI” header, derives from the “From”
header).
3-RPID-PAI-FROM
4-PAI-RPID-FROM
5-RPID-FROM
Web User Interface:
Account->Advanced->Caller ID Source
Phone User Interface:
None
To configure the presentation of the caller identity via web user interface:
1. Click on Account->Advanced.
2. Select the desired value from the pull-down list of the Caller ID Source.