Yealink CP860 - Page 189

Configuring Basic Features
177
Parameters
Permitted Values
Default
Web User Interface:
Features->Intercom->Accept Intercom
Phone User Interface:
Menu->Features->Intercom->Accept Intercom
features.intercom.mute
0 or 1
0
Description:
Enables or disables the IP phone to mute the microphone when answering an
intercom call.
0-Disabled
1-Enabled
If it is set to 1 (Enabled), the microphone is muted for intercom calls, and then the
other party cannot hear you.
Note: It works only if the parameter “features.intercom.allow” is set to 1 (Enabled).
Web User Interface:
Features->Intercom ->Intercom Mute
Phone User Interface:
Menu->Features->Intercom->Intercom Mute
features.intercom.tone
0 or 1
1
Description:
Enables or disables the IP phone to play a warning tone when receiving an intercom
call.
0-Disabled
1-Enabled
Note: It works only if the parameter “features.intercom.allow” is set to 1 (Enabled).
Web User Interface:
Features->Intercom->Warning Tone
Phone User Interface:
Menu->Features->Intercom->Warning Tone
features.intercom.barge
0 or 1
0