Yealink CP860 - Page 221

Configuring Advanced Features
209
Parameters:
programablekey.X.type
programablekey.X.value.
Local
Web User Interface
Assign a multicast paging key.
Navigate to:
http://<phoneIPAddress>/servlet
?p=dsskey&model=2&q=load
Specify a multicast codec for the
IP phone to send the RTP stream.
Navigate to:
http://<phoneIPAddress>/servlet
?p=features-general&q=load
Details of the Configuration Parameter:
Parameters
Permitted Values
Default
multicast.codec
Refer to the
following content
G722
Description:
Configures the codec of multicast paging.
Example：
multicast.codec = G722
Permitted Values:
PCMU, PCMA, G729, G722,
Web User Interface:
Features->General Information->Multicast Codec
Phone User Interface:
None
programablekey.X.type
(X=1-6, 9, 13)
24
0
Description:
Configures a programmable key to be a multicast paging key on the IP phone.
The digit 24 stands for the key type Multicast Paging.
For more information on how to configure the programable key, refer to Appendix
C: Configuring Programable Key on page 353.
Example：
programablekey.3.type = 24