Yealink CP860 - Page 268

Administrator’s Guide for CP860 IP conference phones
256
feature.
Navigate to:
http://<phoneIPAddress>/servlet?
p=network-adv&q=load
Phone User Interface
Configure VLAN for the Internet
port.
Details of Configuration Parameters:
Parameters
Permitted Values
Default
network.vlan.internet_port_enable
0 or 1
0
Description:
Enables or disables VLAN for the Internet (WAN) port.
0-Disabled
1-Enabled
Note: If you change this parameter, the IP phone will reboot to make the change
take effect.
Web User Interface:
Network->Advanced->VLAN->WAN Port->Active
Phone User Interface:
Menu->Settings->Advanced Settings (Default password:
admin)->Network->VLAN->WAN Port->VLAN Status
network.vlan.internet_port_vid
Integer from 1 to 4094
1
Description:
Configures VLAN ID for the Internet (WAN) port.
Note: If you change this parameter, the IP phone will reboot to make the change
take effect.
Web User Interface:
Network->Advanced->VLAN ->WAN Port->VID (1-4094)
Phone User Interface:
Menu->Settings->Advanced Settings (Default password: admin) ->Network->
VLAN ->WAN Port-> VID
network.vlan.internet_port_priority
Integer from 0 to 7
0
Description:
Configures VLAN priority for the Internet (WAN) port.
7 is the highest priority, 0 is the lowest priority.