EasyManua.ls Logo

Yealink CP860 - Page 277

Yealink CP860
417 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Configuring Advanced Features
265
Parameters
Permitted Values
Default
None
network.qos.signaltos
Integer from 0 to 63
26
Description
Configures the DSCP for SIP packets.
The default DSCP value for SIP packets is 26 (Assured Forwarding).
Note: If you change this parameter, the IP phone will reboot to make the change
take effect.
Web User Interface:
Network->Advanced->SIP QoS (0~63)
Phone User Interface:
None
To configure DSCPs for voice packets and SIP packets via web user interface:
1. Click on Network->Advanced.
2. Enter the desired value in the Voice QoS (0~63) field.
3. Enter the desired value in the SIP Qos (0~63) field.
4. Click Confirm to accept the change.
A dialog box pops up to prompt that the settings will take effect after reboot.
5. Click OK to reboot the phone.

Table of Contents

Other manuals for Yealink CP860

Related product manuals