Configuring Advanced Features
269
person for the IP phone, together with
the contact information.
For example, Sysadmin
(root@localhost)
1.3.6.1.2.1.37459.2.1.2.0
An administratively-assigned name for
the IP phone. If the name is unknown,
the value is a zero-length string.
1.3.6.1.2.1.37459.2.1.3.0
The physical location of the IP phone.
1.3.6.1.2.1.37459.2.1.4.0
The time (in milliseconds) since the
network management portion of the
system was last re-initialized.
1.3.6.1.2.1.37459.2.1.5.0
The firmware version of the IP phone.
1.3.6.1.2.1.37459.2.1.6.0
The hardware version of the IP phone.
1.3.6.1.2.1.37459.2.1.7.0
1.3.6.1.2.1.37459.2.1.8.0
The MAC address of the IP phone.
1.3.6.1.2.1.37459.2.1.9.0
The IP address of the IP phone.
1.3.6.1.2.1.37459.2.1.10.0
The target version to which the current
version is automatically updated.
Format:
MacVersion[*]ComVersion[*]
For example,
MacVersion[0.0.0.1]ComVersion[0.0.0.1]
1.3.6.1.2.1.37459.2.1.11.0
The command of phone reboot.
Format (XXXX is replaced by the IP
address of phone):
snmpset -v 2c XXXX public
37459.2.1.11.0 s reboot
Procedure
SNMP can be configured using the configuration files or locally.
Configure SNMP on the IP
phone.
Parameters:
network.snmp.enable
network.snmp.port
network.snmp.trust_ip
To Next Page
Loading...
