Resource Files
325
The dial-now template helps with the creation of multiple dial-now rules. After setup,
place the dial-now file to the provisioning server and specify the access URL of the file in
the configuration files.
When editing a dial-now template, learn the following:
<DialNow> indicates the start of a template and </DialNow> indicates the end of
a template.
Create dial-now rules between <DialNow> and </DialNow>.
At most 100 dial-now rules can be added to the IP phone.
The expression syntax in the dial-now rule template is the same as that introduced
in the section Dial Plan on page 81.
Procedure
Use the following procedures to customize a dial-now template.
To customize a dial-now template:
1. Open the template file using an ASCII editor.
2. Add the following string to the template, each starting on a separate line:
<Data DialNowRule=""/>
Where:
DialNowRule="" specifies the dial-now rule.
3. Specify the values within double quotes.
4. Save the change and place this file to the provisioning server.
The following shows an example of a dial-now template:
<DialNow>
<Data DialNowRule="1234"/>
<Data DialNowRule="52[0-6]"/>
<Data DialNowRule="xxxxxx"/>
</DialNow>
To Next Page
Loading...
