Description :
Enables or disables Watch Dog feature.
0-Disabled
1-Enabled
If it is set to 1 (Enabled), the IP phone will reboot automatically when the system is
broken down.
Web User Interface:
Settings->Preference->Watch Dog
Phone User Interface:
None
To configure watch dog via web user interface:
1.
Click on Settings->Preference.
2.
Select the desired value from the pull-down list of Watch Dog.
3.
Click Confirm to accept the change.
Status indicators may consist of the indicator LEDs and the on-screen icon.
The following shows two examples of obtaining the IP phone information from status
indicators on the CP860 IP conference phones:
If a LINK failure of the IP phone is detected, a prompting message “Network
To Next Page
Loading...
