Description:
Configures the secondary IPv4 DNS server when the IP address mode is configured
as IPv4 or IPv4&IPv6, and the Internet (WAN) port type for IPv4 is configured as Static
IP Address.
Example:
network.secondary_dns = 202.101.103.54
Note: If you change this parameter, the IP phone will reboot to make the change take
effect.
Web User Interface:
Network->Basic-> Pv4 Config->Static IP Address->Secondary DNS
Phone User Interface:
Menu->Settings->Advanced Settings (Default password: admin) ->Network->WAN
Port ->IPv4->Static IPv4 Client->Secondary DNS
To configure the IP address mode via web user interface:
1. Click on Network->Basic.
2. Select the desired value from the pull-down list of Mode (IPv4/IPv6).
3. Click Confirm to accept the change.
A dialog box pops up to prompt that settings will take effect after reboot.
To Next Page
Loading...
