Yealink CP860 - Page 61

Configuring Basic Features
49
Details of the Configuration Parameter:
Parameter
Permitted Values
Default
security.user_password
String within 32 characters
admin
Description:
Configures the password of the administrator for web server access.
The IP phone uses “admin” as the default administrator password.
Example:
security.user_password = admin:password123 means setting the password of
administrator (current user name is “admin”) to password123.
Note: IP phones support ASCII characters 32-126(0x20-0x7E) in passwords. You can
set the password to be empty via web user interface only.
Web User Interface:
Security->Password
Phone User Interface:
Menu->Settings->Advanced Settings (Default password: admin)->Set Password
To change the administrator password via web user interface:
1. Click on Security->Password.
2. Select admin from the pull-down list of User Type.
3. Enter the current administrator password in the Old Password field.
4. Enter a new administrator password in the New Password and Confirm Password
fields.
Valid characters are ASCII characters 32-126(0x20-0x7E) except 58(3A).
5. Click Confirm to accept the change.
To change the administrator password via phone user interface:
1. Press Menu->Settings->Advanced Settings (Default password: admin) ->Set
Password.
2. Enter the current administrator password in the Current PWD field.