Yealink CP860 - Page 69

Configuring Basic Features
57
Parameters
Permitted Values
Default
Description:
Enables or disables the IP phone to update time with the offset time obtained from
the DHCP server.
0-Disabled
1-Enabled
Note: It is only available to offset from GMT 0.
Web User Interface:
Settings->Time & Date->DHCP Time
Phone User Interface:
Menu->Settings->Basic Settings->Time & Date->DHCP Time
local_time.ntp_server1
IP Address or Domain Name
cn.pool.ntp.org
Description:
Configures the IP address or the domain name of the NTP server 1.
Example：
local_time.ntp_server1 = 192.168.0.5
Web User Interface:
Settings-> Time & Date->Primary Server
Phone User Interface:
Menu->Settings->Basic Settings->Time & Date->SNTP Settings->NTP Server1
local_time.ntp_server2
IP Address or Domain Name
cn.pool.ntp.org
Description:
Configures the IP address or the domain name of the NTP server 2. If the NTP server 1
is not configured or cannot be accessed, the IP phone will request the time and date
from the NTP server 2.
Example：
local_time.ntp_server2 = 192.168.0.6
Web User Interface:
Settings->Time & Date->Secondary Server
Phone User Interface:
Menu->Settings->Basic Settings->Time & Date->SNTP Settings->NTP Server2
local_time.interval
Integer from 15 to 86400
1000