Yealink CP860 - Page 91

Configuring Basic Features
79
Parameters
Permitted Values
Default
Phone User Interface:
Menu->Features->Key as Send
features.key_tone
0 or 1
1
Description:
Enables or disables the IP phone to play a tone when a user presses a key on your
phone keypad.
0-Disabled
1-Enabled
If it is set to 1 (Enabled), the IP phone will play a tone when a user presses a key on
your phone keypad.
Web User Interface:
Features->Audio->Key Tone
Phone User Interface:
None
features.send_key_tone
0 or 1
1
Description:
Enables or disables the IP phone to play a tone when a user presses a send key.
0-Disabled
1-Enabled
If it is set to 1 (Enabled), the IP phone will play a tone when a user presses a send
key.
Note: It works only if the parameter “features.key_tone” is set to 1 (Enabled).
Web User Interface:
Features->Audio->Send Sound
Phone User Interface:
None
To configure a send key via web user interface:
1. Click on Features->General Information.