4
Hardware Overview
Registration
You can register up to 8 CP930W to one W60B base station. Each CP930W can only be regis-
tered up to one base station.
When the CP930W LCD screen prompts “Unregistered!”, long press on the base station till
the registration LED indicator flashes.
There are two methods to register a new CP930W:
Easy Registration:
1. Tap the Reg soft key on the CP930W to register quickly.
Normal Registration:
1. Tap the OK soft key on the CP930W, and then select Register Handset.
2. Tap the OK soft key after searching a base station successfully.
3. Enter the base station PIN (default: 0000), and then tap the Done soft key to complete the
registration.
To register to multiple base stations, tap the Menu->Settings->Registration->Register Hand-
set, then repeat steps 2-4.
Note:
• If the CP930W is registered to the base station successfully, the LCD screen prompts
“Handset Subscribed” and “Base NO.”( the “NO.“ indicates the last 4 characters of the base
station’s MAC address).
• If the CP930W LCD screen prompts “Searching for Base”, check that your base station is
powered on.
Getting Started
Mute Key
Speaker
Keypad
Volume(+) Key
Volume(—) Key
Microphone
1
2
3
4
5
7
8
9
LCD Screen
Soft Keys
1
1
2
10
2
11
12
On-hook/Power Key
6
13
14
Bluetooth Key
OK Key
Welcome
Initializing...Please wait
Up Navigation Key
Microphone
Off-hook Key
Down Navigation Key
E
N
G
L
I
S
H
E
N
G
L
I
S
H
To Next Page
Loading...
Need help?
General
