Yealink CTP18 Administrator's Guide

| Configuring Video Settings | 171
2. Configure and save the following settings:
Parameter Description Configuration Method
Output in IDLE
Specify the content to be displayed
on the secondary monitor when the
system is idle.
• Auto—The secondary monitor
displays the content in this
priority: PC>Active Camera>VCS
Camera>Camera N.
• PC—The secondary monitor
displays the PC content.
• Active Camera—The secondary
monitor displays the video images
from the currently active camera.
If you change the active camera,
the video image on the secondary
monitors also changes. For
example, if you use the VC880/
VC800/PVT980 camera as the
active camera first, and then
you select the preset of camera
1 (The Preset Synchronize
With Active Camera feature is
enabled, and the active camera
becomes camera 1 at this time),
the secondary monitor displays the
image of camera 1.
• VCS Camera (it is not applicable
to VC880)—The secondary
monitor displays the video images
from the camera built-in VCS.
• Camera N—The secondary
monitor displays the video images
from the connected camera N.
Note: the default value is Auto.
Web user interface

Yealink CTP18 Specifications

General

Aspect ratio	16:10
Display diagonal	8 \
Display resolution	1280 x 800 pixels
Touchscreen technology	Capacitive
Built-in speaker(s)	No
Ethernet LAN	Yes
Mounting type	Wall/Tabletop
Product color	Black, Grey
RJ-45 ports quantity	1
Cables included	LAN (RJ-45)
Power source type	DC
Power consumption (typical)	7 W

Weight and Dimensions

Depth	100 mm
Width	202 mm
Height	151 mm