Yealink CTP18 Administrator's Guide

| Configuration Methods | 54
Using the Virtual Remote Control
Except for the remote control, you can use the virtual remote control on your web user interface to control
your system.
About this task
Note: This feature is not applicable to the third generation VCS devices and VP59.
Procedure
1. On your web user interface, go to Home > Remote Control.
The virtual remote control appears.
2. Click the corresponding keys on the remote control to control the VCS codec.
3. Click Remote Control to close the virtual remote control.
Customizing the Key Type
You can configure the custom key on VCR11 or on VCR20 to the desired functions as needed.
Procedure
1. On your web user interface, go to Setting > Remote Control > Remote Control.

Yealink CTP18 Specifications

General

Aspect ratio	16:10
Display diagonal	8 \
Display resolution	1280 x 800 pixels
Touchscreen technology	Capacitive
Built-in speaker(s)	No
Ethernet LAN	Yes
Mounting type	Wall/Tabletop
Product color	Black, Grey
RJ-45 ports quantity	1
Cables included	LAN (RJ-45)
Power source type	DC
Power consumption (typical)	7 W

Weight and Dimensions

Depth	100 mm
Width	202 mm
Height	151 mm